Dynavector DV 10X5 MC phono cartridge

This is about as far as I would go personally in spending for a phono cartridge (especially a MC cart), it may even be $50 more than I would do, but I’m listing it just in case any readers out there are of a different mindset on it.

Dynavector DV 10X5 MC phono cartridge:
Type High output moving coil cartridge with flux damper and softened magnetism
Output Voltage 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation 25 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 – 20,000Hz (± 2dB)
Compliance 12 x 10-6 cm/dyn
Tracking force 1.8 – 2.2 grams
DC resistance R=150 ohms
Recommended load
impedance >1K ohms
Cantilever 6mm length aluminium pipe
Stylus Elliptical
Weight 7.3 grams